ICS 695XL GC 16" Concrete & Utility Pipe Gas Chainsaw + Guidebar + TwinMax Chain

Description

695XL GC Gas Powered Concrete & Utility Pipe 16" Chainsaw + Guidebar + TwinMax Chain + FREE SHIPPING
Deepest, Most Versatile Petrol Powered Saw
The 695XL features include an easy to start engine with higher energy ignition system and
durable, long-lasting components including a new muffler, carburetor and piston & cylinder.
Available with 12-inch (30 cm) - 16-inch (40cm) guidebars and the entire line of MAX, ProForce
and PowerGrit series diamond chains. Based on the best-selling 695 saw platform, the 695XL is
the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors
and concrete professionals.
FEATURES AND BENEFITS
Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe and more
Most versatile petrol-powered saw
New piston and cylinder lowers engine temperature
Longer life muffler with reinforced internal baffle
Easy-to-start with higher energy ignition system
New easy-to-tune carburetor
TECHNICAL SPECIFICATIONS
Engine Type
2-Stroke, Air Cooled
Displacement
94cc (5.7 cu-in)
Horsepower
4.8kW (6.4 hp) @ 9000 rpm
Torque
5.7 Nm (50.4 in-lbs) @ 7200 rpm
Engine Speed
9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
Chain Speed at Maximum Power
28 m/s (5500 ft /min)
Weight
9.5 kg (21 lbs) powerhead only
Dimensions
46cm (18") L x 36cm (14") H x 30cm (12") W
Starter
Recoil, dust and water resistant
Ignition
Special water resistant electronic ignition
Fuel ratio
2% (50:1) petrol-to-oil
Fuel Capacity
1 liter (0.26 gallon)
Water Supply Requirement
Minimum: 1.5 bar (20 psi)
Water Flow Requirement
Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1)
115 dB(A); (Kwa=1.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa
104.6 dB(A) (K=1.0 dB(A))
Vibration, ahv eq Concrete Cutting (2)
3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle
Vibration, ahv eq Pipe Cutting (2)
5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle